Phone - Fujitsu ARROWS NX F-01K Instruction Manual

Phone

Making a call/video call
1
From the Home screen,
2
[Dial]→Enter a phone number
･
To correct phone number, tap
Notifying caller ID :
[Not notify]
･
Your caller ID is important personal information. So,
take care when notifying people of it.
→[Select prefix]→Select a prefix
Selecting prefix :
･
Select a number registered in "Prefix settings" (prefix)
(→P74) beforehand to add before a phone number.
Adding 2-sec pause/wait :
wait]→Enter an additional number
･
Used to enter main phone number and additional code
at once when entering the code additionally during a
call for bank balance inquiries, ticket reservation
services, etc.
2-sec pause "," : When the phone number is dialed, 2-
second pause will be automatically inserted and then
additional code will be sent.
Wait ";" : When the phone number is dialed, the phone
will wait automatically and a confirmation message for
sending additional code appears. When you tap [Yes],
the additional code is sent.
.
→[Caller ID notification]→[Notify]/
→[Add 2-sec pause]/[Add
3
Making a video call :
4
When a call is ended, [END CALL]
✔INFORMATION
･
With VoLTE, you can make high-quality voice and video calls.
To use VoLTE, both parties must meet the following
requirements.
- Both terminals support VoLTE
- Both parties are in a VoLTE service area
*1
- "Network Mode"
GSM(Auto)] and [Call mode setting
With VoLTE (HD+), you can make more higher quality voice
and video calls than VoLTE.
To use VoLTE (HD+), both terminals support VoLTE (HD+) in
addition to the usage conditions of VoLTE.
*1 You can set from the Home screen,
[Wireless & networks]→[More]→[Cellular networks]→
[Network Mode].
*2 You can set from the Home screen,
[Wireless & networks]→[More]→[Cellular networks]→
[Call mode setting].
･
On a video call, both speakers can see each other while
talking. You can also switch between voice and video calls.
- When you make a video call, voice call and packet
communication charges will apply. When you receive a
video call, packet communication charges will apply.
- Video call imaging is based on best-effort communication
(which optimizes transmission speed depending on how
busy your network is), so the quality of video images varies
depending on your network environment.
67
→[Video call]
in Cellular networks is set to [4G/3G/
*2
] is ON.
→[Settings]→
→[Settings]→
Phone