Fujitsu ARROWS NX F-01K Instruction Manual page 130

･
To use docomo services via Wi-Fi, you need to set up your d
ACCOUNT. To set up, from the Home screen,
→[docomo service/cloud]→[d ACCOUNT setting] and
operate.
･
When you save multiple Wi-Fi networks, to switch the
connection, select a Wi-Fi network to connect and then tap
CONNECT]. The current Wi-Fi network is disconnected and
the selected Wi-Fi network is switched automatically.
* The information of disconnected network is not deleted.
You can reconnect it by connecting operation.
◆ Scanning Wi-Fi networks
･
Set Wi-Fi to On in advance.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[MENU]→[Refresh]
◆ Adding Wi-Fi network
Enter network SSID or security information to add Wi-Fi
network manually.
･
Set Wi-Fi to On in advance.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[Add network]
3
Enter a network SSID of Wi-Fi network to add
→Select security
･
Security can be set to [None], [WEP], [WPA/WPA2 PSK]
or [802.1x EAP].
→[Settings]
→[Settings]→
→[Settings]→
128
4
Enter additional security information as
required→[SAVE]
◆ Deleting Wi-Fi network connecting
information
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
Select the connected Wi-Fi network→
[FORGET]
◆ Connecting Wi-Fi network easily
When using the wireless LAN access point which supports
AOSS™ system or WPS system, connection can be
established with simple operation.
･
Set Wi-Fi to On in advance.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[MENU]→[Advanced]→[Easy Settings]
3
Select the registration method
AOSS™ system : [AOSS system]→Tap [AOSS] button→
Operate on the access point→On the connection
completion screen, [Finish]
→[Settings]→
→[Settings]→
Settings