Silent Mode; Setting Display; Stand-By Display Setting; Display Light - Fujitsu Docomo F-07F Instruction Manual

Silent mode

This function mutes the sound emitted from the
FOMA terminal such as ring alert, Keypad sound,
open/close operation sound, Alarm sound,
confirmation sound for reading a code with Bar
code reader, and notifies incoming calls with
vibrator (vibration). The microphone is sensitized
in Silent mode, and you can call in a small voice.
a # (1 sec. or more)
appears on the stand-by display in Silent
mode (manner mode).
Canceling Silent mode (manner mode) : #
(1 sec. or more)
Point
Shutter sound, Auto focus lock sound for shooting
still pictures, and count down sound of Auto timer
are emitted even in Silent mode.

System sound

Set sounds emitted for key operation, opening/
closing the FOMA terminal, and shutter sound for
shooting still images or moving pictures
(including recording for Voice recorder).
meh Settingeb Sound/Vibration/
a
Mannereb Other soundsed System
soundeSelect an itemeSelect a sound
Point
Even if Keypad sound is set to on, no sound is made
while i-αppli is activated.
Sound/Screen Setting

Setting display

Stand-by display setting

You can change the default stand-by display.
<Example> Setting an image
meh Settingea Screen/Display
a
eb Stand-by display settingea
Image/i-αppliea Set image
When Kisekae Tool is set, select "Yes" on the
confirmation screen for canceling.
b
Select a foldereMove the cursor to an
imageeC [OK]e"Yes"

Display light

You can set the brightness of screen and Light
time-out.
a meh Settingec Backlight/
Illuminationea Display lighteSelect
an itemeSelect a time or operation

Privacy view

This function allows the display to be less-visible
to the people around you. You can start/cancel on
the screen other than the stand-by display.
s (1 sec. or more)
a
Canceling Privacy view : s (1 sec. or more)
33