Setting Character Entry - Fujitsu ARROWS NX F-01K Instruction Manual

■ Gesture input
If you touch and hold the key assigned the character you want
to enter, characters (gesture guide) will be displayed around
that key. Slide your finger to the desired character without
releasing your finger from the screen.
･
To enter voiced/semi-voiced sound/small/geminate
consonant characters, slide down once or twice without
releasing your finger from a key. Gesture guide for voiced/
semi-voiced sound/small/geminate consonant characters
around the key appears. Slide your finger to the desired
character without releasing.
Example: Entering "ぱ"
･
In the alphanumeric input mode, you can switch between
uppercase and lowercase characters by sliding downwards
without releasing your finger from the screen.
■ 2-touch input
Tap a key assigned a character you want to enter first, then tap
a desired character.
◆ Switching input method
You can also switch to another input method such as the
Google keyboard to enter characters.
･
The Google keyboard does not support the Japanese input
mode.
1
From the Home screen,
[Languages & input]
2
[Current Keyboard]→Select an input method
･
The keyboards displayed in the list of "Current
Keyboard" can be set in [Manage keyboards] in "Setting
character entry" (→P44).
✔INFORMATION
･
To return to the ATOK Japanese keypad, select [Super ATOK
ULTIAS].
･
To switch the input mode during entering characters, touch
and hold of the navigation bar (→P49) to select the input
mode.

◆ Setting character entry

Set by character entries.
1
From the Home screen,
[Languages & input]
2
[Virtual keyboard]
The virtual keyboard list is displayed.
44
→[Settings]→
→[Settings]→
Before using the terminal