Software Update - Fujitsu ARROWS NX F-01K Instruction Manual

･
Function settings and information may be cleared (reset) by
malfunctions, repair or other handling of the terminal.
Should that happen, set up the functions again. Depending
on the setting, a packet communication charge may be
applied.
･
If repair is executed, MAC address for Wi-Fi and Bluetooth
address may be changed regardless of malfunction part.
･
Take care not to bring an object that is easily affected by
magnetism such as a cash card near to the terminal because
the card may become unavailable.
･
This terminal is waterproof. However, if inside of the
terminal gets wet or moist, turn the power off immediately,
and bring the terminal to a repair office as soon as possible.
Note that repair may not be possible depending on the
condition of the terminal.
Data you created and downloaded data
Note that data you created or data you retrieved or
downloaded from sources other than your terminal may
be changed or lost when you change the model or have
repairs done to the terminal. DOCOMO shall have no
liability for any change or loss of any kind. Note that
DOCOMO is not liable for a packet communication charge
of re-downloading data. Under some circumstances,
DOCOMO may replace your terminal with its equivalent
instead of repairing it. In that case, we cannot transfer
these data to replaced products except for some data.

Software update

◆ About Software Update
Software Update is a function that checks if update is
necessary, and if required, download and install software to
update.
When update is required, it is notified with
Update) on the status bar or in the NTT DOCOMO website.
･
Software Update includes the following contents, etc. To
use the terminal in safety and more comfortably, be sure to
upgrade to the latest version.
- Improving and adding functions
- Easier to operate
- Improving quality
- Security patch update
✔INFORMATION
･
Updating can be done even when data saved to the terminal
is remaining; note that data may not be always secured
depending on the conditions of your terminal (such as
malfunction, damage, or water leak). You are recommended
to back up necessary data beforehand. However, some data
may not be backed up.
196
(Software
Appendix/Index