Receiving A Call/Video Call - Fujitsu ARROWS NX F-01K Instruction Manual

･
In Japan, if the docomo nano UIM card is not inserted,
emergency calls 110, 119 and 118 cannot be made on the
PIN code entry screen, during PIN code lock/PUK lock or
while updating software.
･
If you dial 110, 119, or 118 overseas, an emergency call
screen may appear but the call is normally sent.
･
If you make an emergency call with Reject call settings
enabled, Reject call settings will be disabled.
･
For some network operators, emergency calls via VoLTE
may not be available. In that case, set "Call mode setting"
(→P67) to OFF.
･
Emergency call may not be available via some networks.
･
You cannot make emergency call with video call.
◆ International call (WORLD CALL)
WORLD CALL is a service which allows you to make
international calls with your DOCOMO terminal in Japan.
･
For details of WORLD CALL, refer to NTT DOCOMO website.
1
From the Home screen,
hold [0]→Enter "Country code-Area code (City
code) omitted prefix 0 and phone number→
･
In some countries and areas such as Italy, "0" is
required.
･
When selecting from the country list to enter "+ country
code", enter the area code (city code) and phone
number, →[International call]→Select a country→
[WORLD CALL].
→[Dial]→Touch and

Receiving a call/video call

◆ Receiving a voice call
<Example> When a call is received in sleep mode
1
A call is received
The incoming call screen (full-screen) appears.
Press P /volume key to stop ringtone or vibration.
･
2
→[ACCEPT]
Declining call : →[REJECT]
Rejecting a call and sending SMS :
SMS]→Select a message
Recording phone memo :
3
When a call is ended, [END CALL]
69
→[Reject call with
→[Phone memo]
Phone