Fujitsu ARROWS NX F-01K Instruction Manual page 131

WPS system : [WPS system]→[Push button system]/[PIN
entry system (8 digits)]/[PIN entry system (4 digits)]→
Operate on the access point
･
In case of push button method, press a dedicated button
on an access point. In case of PIN entry method, enter
PIN code displayed on the terminal to an access point
device.
✔INFORMATION
･
Some wireless LAN access points, connection by AOSS™
may not be established. If connection is failed, try connecting
by WPS system or manual setting.
･
If he security is set to WEP on the wireless LAN access point,
WPS system is not available.
◆ Connecting other devices with Wi-Fi
Direct
Connect between Wi-Fi Direct devices without routing an
access point etc.
･
Set Wi-Fi to On in advance.
･
To exchange data such as videos or still images using Wi-Fi
Direct, download an application compatible with data
exchange via Wi-Fi Direct from Play Store and install it.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[MENU]→[Advanced]→[Wi-Fi Direct]
･
When a Wi-Fi Direct device does not appear, tap
[SEARCH FOR DEVICES].
→[Settings]→
129
3
Tap the detected Wi-Fi Direct device
Disconnecting Wi-Fi Direct device :
Wi-Fi Direct device→[OK]
■ When connection request is sent from the other
Wi-Fi Direct device
When an invitation screen for connecting appears, tap
[ACCEPT].
◆ Multi-connection
Set whether to use Wi-Fi network and packet communication
(LTE/3G) simultaneously for the comfortable Internet
connection When Multi-connection is set to ON, you can
download or stream various contents such as videos and
music with high-speed communication (High-speed
download).
･
Set Wi-Fi to On to connect to Wi-Fi network in advance.→
P127
･
A packet communication charge may be applied using
Multi-connection since it also uses packet communication
(LTE/3G). If you do not want to use packet communication,
turn off Multi-connection.
･
Multi-connection may not be available depending on the
application.
･
Depending on the connected Wi-Fi network, high-speed
communication may not be available.
1
From the Home screen,
[Wireless & networks]→[Wi-Fi]
2
[MENU]→[Advanced]→[Multi-connection]
3
Set [Multi-connection] to ON
Tap the connected
→[Settings]→
Settings