Bluetooth; Pairing Gvc3210 With A Bluetooth Device; Connecting To A Bluetooth Device - Grandstream Networks GVC3210 User Manual

Bluetooth

On GVC3210, Bluetooth is enabled by default. Users could connect Bluetooth by remote control, send or
receive files to cellphone, or use Bluetooth speaker and etc on GVC3210.

Pairing GVC3210 with a Bluetooth Device

Before connecting GVC3210 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are manually unpaired. To pair Bluetooth device:
On the LCD display device, go to Settings  Network  Bluetooth.
1.
2. Press button on the remote control and select "Search for devices".
3. GVC3210 scans and displays the IDs of all available Bluetooth devices in range. Once the Bluetooth
device shows up in the result, tap on it to start pairing.
4. Confirm the passkey in the prompted message (if any). Or, if passcode is required, please refer to the
device's documentation or contact with the device administrator to obtain the passcode.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
The external speaker provided with GVC3210 is not pre-paired to GVC3210. If the user would like to use
external speaker via Bluetooth connection with GVC3210, the user must pair and connect it to GVC3210
manually before using it for audio output.

Connecting to a Bluetooth Device

After pairing successfully, the device will be connected to GVC3210 immediately. Users will see this device
listed under "Paired Devices". Tap on
"Unpair" and etc.
next to the connected device. Users will see options "Rename",
GVC3210 User Guide
Version 1.0.1.18
P a g e | 43