Figure 77: Ldap Settings Example In Web Ui - Grandstream Networks GVC3210 User Manual

Max Hits
Search Timeout (ms)
LDAP Lookup When
Dialing
Search LDAP For Incoming
Call
Here is an example configuration on GVC3210 LDAP settings in web UI. The LDAP server is the built-in
LDAP server in Grandstream UCM6xxx.
It is used to configure the maximum number of results to be returned
by the LDAP server. If set to 0, server will return all search results.
The default setting is 50.
It is used to configure the interval (in seconds) for the server to process
the request and client waits for server to return. The default setting is
30 seconds.
It is used to set if allow the phone system to do the LDAP number
searching when making outgoing calls. The default setting is "No".
It is used to set if allow the phone system to do LDAP number
searching for incoming calls. The default setting is "No".

Figure 77: LDAP Settings Example in Web UI

GVC3210 User Guide
Version 1.0.1.18
P a g e | 100