Pairing Gvc3200/Gvc3202 With A Bluetooth Device - Grandstream Networks GVC3200 User Manual

PAIRING GVC3200/GVC3202 WITH A BLUETOOTH DEVICE

Before connecting GVC3200/GVC3202 with other Bluetooth device, users must pair them first. They will
stay paired afterwards unless they are manually unpaired. To pair Bluetooth device:
1. On the LCD display device, go to Settings->Network->Bluetooth.
2. Press button on the remote control and select "Search for devices".
3. GVC3200/GVC3202 scans and displays the IDs of all available Bluetooth devices in range. Once the
Bluetooth device shows up in the result, tap on it to start pairing.
4. Confirm the passkey in the prompted message (if any). Or, if passcode is required, please refer to
the device's documentation or contact with the device administrator to obtain the passcode.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
The external speaker provided with GVC3200/GVC3202 is not pre-paired to GVC3200/GVC3202. If the
user would like to use external speaker via Bluetooth connection with GVC3200/GVC3202, the user must
pair and connect it to GVC3200/GVC3202 manually before using it for audio output.
-------------------------------------------------------------------------------------------------------------------- ------------------------
CONNECTING TO A BLUETOOTH DEVICE
After pairing successfully, the device will be connected to GVC3200/GVC3202 immediately. Users will see
this device listed under "Paired Devices". Tap on
options "Rename", "Unpair" and etc.
Firmware Version 1.0.1.65
next to the connected device. Users will see
GVC3200/GVC3202 User Guide Page 44 of 145