Grandstream Networks GVC3210 User Manual page 28

Camera
PIP
Mute/DND
Presentation
Send/Answer/Add
Party into Conference
End Call/Remove Party
from Conference
Backspace
Navigation Keys:
Up/Down/Left/Right
OK
Power On/Off
Switch to EPTZ control mode during a call or in idle status.
Switch screen layout in conference.

Mute GVC3210 in conference.

Press the MUTE key to enable/disable DND mode when
GVC3210 is in idle.

Enable/Disable presentation function to send presentation
to all members in the conference.

Enable/Disable presentation function to show presentation
on displayed device which is connected to HDMI output 1
as projection when GVC3210 is in standby mode.

Access the dial screen by default when GVC3210 is in
idle mode.

Enter phone number and press the key to dial out.

Access the invite screen to add members in a conference.

Press the key to bring out the backstage conference.

Press the key to redial the last outgoing call.

Delete members in conference.

Hang up the conference.
Press the key to delete input characters.

Press to adjust cursor movement.

Control EPTZ movement in camera mode.

Press to confirm operations.

Bring up the soft keypad when the cursor is in an input box.
LCD prompt shows following three options after pressing this
key:

Switch GVC3210 into sleep mode.

Power Off

Reboot
GVC3210 User Guide
Version 1.0.1.18
P a g e | 28