Invite Members To Conference; Conference Control; Figure 35: Gvc3210 Conference Control Screen - Grandstream Networks GVC3210 User Manual

Invite Members to Conference

Users could use one of the following ways to add members:

Access the dial screen by clicking on the ADD icon
number to dial out. Once the member answers the call, it will be connected into the conference
automatically.

When GVC3210 is on conference screen, press on the remote
screen. Then, enter the number to dial out. Once the member answers the call, it will be connected into
the conference automatically.

The member calls the conference number. If the host answers the call, the member will be added into
conference automatically.

Conference Control

Tap on to make operations such as mute, disable sound, camera control and suspend video. The
conference control screen is as shown below:
Use Up/Down navigation keys on GVC3210 remote control to select conference member.
1.
Use Left/Right navigation keys on GVC3210 remote control to make operations, press "OK" key to
2.
confirm the operation, press "OK" key again to cancel, e.g. tap on to mute
icon will turn to tap on it
---------------------------------------------------------------------------------------------------------------------------------------- ----
Note:
Users could press the shortcut keys on GVC3210 remote control on conference control screen to mute all,
block all or suspend videos.

Figure 35: GVC3210 Conference Control Screen

again to restore.
GVC3210 User Guide
Version 1.0.1.18
on conference screen. Then, enter the
control to access the call
one member and the
P a g e | 66