Wi-Fi; Connecting To Wi-Fi Network; Wi-Fi Protected Setup (Wps); Figure 14: Gvc3210 Add Wi-Fi Screen - Grandstream Networks GVC3210 User Manual

Wi-Fi

Connecting to Wi-Fi Network

On the LCD display, go to Settings  Network  Wi-Fi to turn on and configure Wi-Fi.
Once Wi-Fi is turned on, GVC3210 will automatically start the scanning within the range. A list of Wi-Fi
networks will be displayed as scanning result. Tap on the SSID and enter the correct password information
to connect to the selected Wi-Fi network.
Follow the steps below for static IP usage under Wi-Fi environment:
1. Tap on one Wi-Fi network in the scanned Wi-Fi list to bring up the dialog that shows signal strength,
security, password and option "Show advanced options".
2. Select "Show advanced options". The dialog will show additional option "IP settings".
3. In "IP settings", select Static IP, enter IP Address, Subnet Mask, and Default router for GVC3210 to
correctly connect to the network.

Wi-Fi Protected Setup (WPS)

In order to connect the GVC3210 to a secure Wireless Network without selecting the network name and
entering the password, WPS can be used in two ways to perform this feature:

Figure 14: GVC3210 Add Wi-Fi Screen

GVC3210 User Guide
Version 1.0.1.18
P a g e | 38