Edit Scheduled Conference; Table 15: Gvc3210 Add Conference Parameters - Grandstream Networks GVC3210 User Manual

3. Fill in conference name, members, start time, conference duration and etc.
4. Press the yellow shortcut key on the remote control to save the scheduled conference.
Parameters Descriptions
Choose the related account for the conference.
Related Account
It is used to set the conference name to identify this conference.
Subject
Click on button
Members
member or a group of members. Press the yellow key on the remote control to
save and go back to schedule screen. Up to 8 members can be added.
It is used to configure the start time of the conference.
Start Time
It is used to configure the end time of the conference.
End Time
It is used to configure whether to remind users in advanced. A prompt dialog box
Remind Time
will pop up on GVC3210 screen 10 minutes before the conference starts.
It is used to select a camera preset when the scheduled conference starts, the
GVC3210's camera will be automatically placed to the preset position. Click on
Conference
Conference preset and select "Custom" to be redirected to preset setting
preset
interface to configure and set a preset. Default is "Not set".
Users could select recurring for the scheduled conference, to repeat the
conference depending on the chosen option. The recurring options are:
Recurring

Edit Scheduled Conference

Follow the steps below to edit scheduled conference:
Access conference schedule screen and select the conference entry users would like to edit.
1.
Press the yellow shortcut key on GVC3210 remote control to access edit screen.
2.
Press the yellow shortcut key on the remote control to save changes, and go back to schedule screen.
3.

Table 15: GVC3210 Add Conference Parameters

to access the Add Member screen. Users can add one

One-time event

Daily

Every Weekday (Mon-Fri)

Weekly

Monthly (by week)

Monthly (by day)

Yearly

Custom
GVC3210 User Guide
Version 1.0.1.18
P a g e | 84