Using Mouse & Keyboard; Using The Led Indicator; Table 6: Gvc3210 Led Indicator Status Descriptions - Grandstream Networks GVC3210 User Manual

Using Mouse & Keyboard
When the USB mouse is plugged into GVC3210, users could make the following operations with the mouse.

Single click the left key of the USB mouse to perform the following operations:
 Access menu.
 Check in the checkbox or enable/disable an option.
 Bring up the drop-down list when clicking on a combo box.
 Switch input methods in the input box, tap on the corresponding buttons on the soft keyboard to
input characters.

Double left clicks
method.

Single click the right key of the USB mouse to exit the current displayed menu. It will go back to the
previous menu without saving the configurations.

Using the LED Indicator

GVC3210 LED indicator is located right above the camera lens. It can be used to notify the users with
current status of the device. Please refer to the status description below.
LED Indicator Status
Solid Green
Flash Green (per 0.5s)
Flash Red (per 1s)
Flash Red (per 0.2s)
Flash Red (per 2s)
Solid Blue
Flash Blue (per 0.5s)
Blue/Red Alternately
OFF
on the soft keyboard can switch to "Always use upper case" in English input

Table 6: GVC3210 LED Indicator Status Descriptions

Descriptions
Booting or the device is already booted up
Pressing any button on the remote control
 Rebooting
 Upgrading
 Factory Reset
 Temperature > 80 degree
 Camera connection failed
Sleep mode
 Recording
 The device is in a call
Pairing the remote control
Aging test
Power off
GVC3210 User Guide
Version 1.0.1.18
P a g e | 31