Participants List; Open Dial Keyboard; End Conference; Figure 42: Gvc3210 Participants List - Grandstream Networks GVC3210 User Manual

Participants List

Users could check all participants in the current IPVideoTalk meeting. If the meeting host does not allow
the participants to check all members, the participants cannot see all members in the meeting.
During IPVideoTalk meeting, click on "More" then click on "Participants List". GVC3210 will show
all participants in the current IPVideotalk meeting, including all participants with all types of clients.

Figure 42: GVC3210 Participants List

Open Dial Keyboard

Users can send DTMF during a conference using "Open Dial Keyboard" function.
1. On GVC3210 remote control, press the red shortcut key, or click on MORE button  select "Open
Dial Keyboard" on the conference screen to bring up the DTMF input screen.
2. Press the digital keys on the remote control to input DTMF. Press to cancel the operation if needed.
Note: The GVC3210 can join a locked meeting with a PIN Code by using "Open Dial Keyboard" to input
the PIN Code followed by #.

End Conference

To end the conference, tap on END button or press key on GVC3210 remote control to either
"Exit Conference" or "End Conference". If GVC3210 is the conference host:
P a g e | 71
GVC3210 User Guide
Version 1.0.1.18