Traceroute
Fill in target host or IP address and click START to view trace route details.
Syslog
Configure Syslog level and server address. By default syslog is turned off.
Developer Mode
Configure whether to enable developer mode. If turned on, ADB (Android Debug Bridge) function will
be enabled on the device. The default setting is "Disabled".
FACTORY RESET
Factory Reset
Restore to the factory settings. If check the "Clear the SD card", the GVC3200/GVC3202 will also
format the internal SD card storage in the device during factory resetting.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please backup the important files or settings before factory resetting.
-------------------------------------------------------------------------------------------------------------------- ------------------------
REBOOT
Reboot
Click the REBOOT button to reboot device.
NETWORK
Users can configure Bluetooth, Ethernet, Wi-Fi (GVC3202 only), Proxy, VPN, VLAN, LLDP and 802.1x
under Network settings here. Some of the configurations here such as Bluetooth, Wi-Fi (GVC3200 only)
and VPN settings are not available in web UI.
BLUETOOTH
Paired Devices
Display paired devices such as Bluetooth remote control, Android mobile phone, Bluetooth speaker
and etc.
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
GVC3200/GVC3202 Administration Guide
Page 22 of 71