Search LDAP Contacts
After configuring LDAP settings, the users could search contacts in LDAP Contacts main interface. In the
following example, the users could enter number or name in the Search field. The LDAP result will be
displayed dynamically when the key word is entered.
If the user presses the Green Call button
call to this contact.
Add Search Result into Local Contacts
After performing LDAP search, the users could select to add the result into GVC3210 local contacts.
Add to Local
On the search result screen, move the selection to the contact, then press the red shortcut key on the
GVC3210 remote control to add single search result to local contacts. Click on OK to confirm Add to
Local.
Figure 78: Search LDAP Contacts
on the GVC3210 remote control, the GVC3210 will initiate a
Figure 79: Add LDAP Search Result to Local Contacts
GVC3210 User Guide
Version 1.0.1.18
P a g e
|
101