CONNECTING TO NETWORK AND DEVICES
GVC3210 supports a variety of network connections (Ethernet, Wi-Fi) and device connections, including
USB, Micro SD card and Bluetooth devices. When the GVC3210 boots up for the first time, a setup wizard
will guide the users to pair and connect the remote control to GVC3210 and get started with the basic
configurations.
Ethernet
If the user would like to use Ethernet connection for network access, please plug the Ethernet cable into
the LAN port on the back of GVC3210. Ethernet connection is turned on as DHCP by default on both IPv4
and IPv6 protocols.
To configure Ethernet settings on GVC3210, go to LCD menu Settings Network Ethernet.
Figure 13: Ethernet Settings
The GVC3210 offers the possibility to prioritize a protocol over another by setting Preferred Internet protocol
to "IPv4", "IPv6", "Both, prefer IPv4" or "Both, prefer IPv6".
P a g e
|
36
GVC3210 User Guide
Version 1.0.1.18