Bluetooth; Ethernet; Wi-Fi (Gvc3200 Only) - Grandstream Networks GVC3200 Administration Manual

Bluetooth


Paired Devices
Display paired devices such as Bluetooth remote control, Android mobile phone, Bluetooth speaker and
etc.

Available Devices
Display all devices in the search range which have enabled Bluetooth.

Ethernet

Click on IPv4 Settings to edit Ethernet settings. By default, DHCP is used for the device to obtain IP address
from LAN network.

Address Type
Allow users to configure the appropriate network settings on the device. Users could select "DHCP",
"Static IP" or "PPPoE". By default, it is set to "DHCP".

IP Address
Enter the IP address when static IP is used.

Subnet Mask
Enter the subnet mask when static IP is used.

Default Router
Enter the default router when static IP is used.

DNS Server 1
Enter the DNS Server 1 address when static IP is used.

DNS Server 2
Enter the DNS Server 2 address when static IP is used.

PPPoE Account ID
Enter the PPPoE account ID when PPPoE is used.

PPPoE Password
Enter the PPPoE password when PPPoE is used.

Wi-Fi (GVC3200 Only)


Enable/Disable Wi-Fi
Enable/disable Wi-Fi. Once enabled, the device will search for available Wi-Fi nearby automatically.
Click on the Wi-Fi network SSID and enter authentication information in the prompt. Users could also
configure DHCP, Static IP or PPPoE for Wi-Fi by clicking on "Show advanced options" in the prompt.
GVC3200/3202 Administration Guide
P a g e | 24