Dialing A Number Via Call History; Direct Ip Call; Paging/Intercom - Grandstream Networks GVC3210 User Manual

Dialing a Number via Call History

1. On the LCD display device, access Applications on home screen and access call history by selecting
.
the icon
2. The LCD will display all call history types. Navigate in the call history list by selecting the call history
category. Select the call history entry you would like to dial out.
3. Press on the remote control to dial out.

Direct IP Call

Direct IP Call allows GVC3210 and another VoIP device to talk to each other in an ad-hoc fashion without
a SIP proxy. Direct IP calls can be made if:

Both GVC3210 and VoIP phone have public IP addresses, Or

Both GVC3210 and VoIP phone are under the same LAN / VPN using private or public IP addresses,
Or

NAT is disabled or GVC3210 NAT is disabled.
Both devices can be connected through a router using public or private IP addresses (with necessary port
forwarding or DMZ).
To make a direct IP call, please follow the steps below:
1. Access the dial screen on GVC3210 LCD.
2. Press the red shortcut key on the remote control to bring up call mode setting screen, set the mode to
"IP Call".
3. Input the target IP address. For example, if the target IP address is 192.168.124.123 and the port is
5062, input the following: 192*168*124*123#5062
The * key represents the dot (.) and the # key represents the colon (:).
4. Press the yellow shortcut key on the remote control to select "Audio Call" or "Video Call".
on the remote control to dial out.
5. Press

Paging/Intercom

Before placing paging/intercom, please make sure the callee has paging/intercom enabled so that it can
answer the paging/intercom call automatically. To make paging/intercom call:
GVC3210 User Guide
Version 1.0.1.18
P a g e | 57