Table of Contents
Advertisement
Search LDAP Contacts
After configuring LDAP settings, the users could search contacts in LDAP Contacts main interface. In the
following example, the users could enter number or name in the Search field. The LDAP result will be
displayed dynamically when the key word is entered.
If the user presses the Green Call button
GVC3200/GVC3202 will initiate a call to this contact.
Add Search Result into Local Contacts
After performing LDAP search, the users could select to add the result into GVC3200/GVC3202 local
contacts.
•
Add to Local
On the search result screen, move the selection to the contact, then press the red shortcut key on the
GVC3200/GVC3202 remote control to add single search result to local contacts. Click on OK to confirm
Add to Local.
Figure 60: Search LDAP Contacts
on the GVC3200/GVC3202 remote control, the
GVC3200/GVC3202 User Guide
Version 1.0.3.64
P a g e
|
103
Advertisement
Table of Contents
