Maintenance/Reboot; Contacts; Contacts/Ldap - Grandstream Networks GVC3200 Administration Manual

Select H.323 syslog level in the dropdown menu. The default setting is "Off", which
H.323 Syslog
means no H.323 related syslog information in syslog. The users can select syslog
Level
level from 1 to 10, with 10 being the highest level.
Ping
Enter the target host and press "Start" to ping the host address. This can be used to
Target Host test the reachability of a host in the network and measure the round-trip time for
messages sent from the device to the destination host.
Traceroute
Fill in target host or IP address and click START to view details displayed below. This
will output a list of traversed routers and measure transit delays of packets across the
Target Host
network.
Developer Mode
If turned on, ADB (Android Debug Bridge) function will be enabled on the device. The
Developer Mode default setting is "Disabled". This option is usually used for development purpose
instead of normal usage.

Maintenance/Reboot

Users could click on "Reboot" to reboot the device, click on "Sleep" to go into sleep mode or click on
"Shutdown" to turn off the device.

Contacts

The users can configure LDAP client configurations under web UI->Contacts->LDAP.

Contacts/LDAP

Parameters Descriptions
Connection Mode It is used to select which protocol will be used for LDAP searching, LDAP or LDAPS.
It is used to configure the URI of the LDAP (Lightweight Directory Access Protocol)
Server Address
server.
Port It is used to configure the LDAP server port. The default LDAP port number is 389.
It is used to configure the LDAP search base. This is the location in the directory where
the search is requested to begin.
Base DN Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
GVC3200/3202 Administration Guide
P a g e | 67