Check Output - Emerson Rosemount 4600 Reference Manual

Reference Manual
00809-0100-4022, Rev GA
Field Communicator
Before placing the transmitter into operation, review the transmitter configuration data
below which was set by the factory.
PV Lower Sensor Limit (LSL)
PV Upper Sensor Limit (USL)
PV Lower Range Value (LRV)
PV Upper Range Value (URV)
PV minimum span
Lower sensor trim point
Upper sensor trim point
Sensor trim calibration type
Damping
Alarm direction
High Alarm (Value)
Low Alarm (Value)
High saturation
Low saturation
Alarm/Saturation type
Sensor S/N
Isolator material
Fill fluid
Process connector
Process connector material
AMS Device Manger
Right click on the device and select Configuration Properties from the menu. Select the
tabs to review the transmitter configuration data.
2.6

Check output

Before performing other transmitter online operations, review the digital output
parameters to ensure the transmitter is operating properly and is configured to the
appropriate process variables.
2.6.1 Process variables
Fast Keys
The process variables for the Rosemount 4600 provide transmitter output, and are
continuously updated. The pressure reading in both engineering units and percent of range
will continue to track with pressures outside of the defined range from the lower to the
upper range limit.
Configuration
www.aotewell.com
Tag
Date
Descriptor
Message
Write protect
Local keys
Universal revision
Field device revision
Software revision
Hardware revision
Physical signal code
Final assembly number
Device ID
Burst mode
Burst option
Poll address
Number req preams
Distributor
1, 1
sales@aotewell.com
Industry Automation
Configuration
September 2016
7
+86-755-8660-6182