Specifications; A.2 Specifications - Emerson Rosemount 4600 Reference Manual

Reference Manual
00809-0100-4022, Rev GA

A.2 Specifications

A.2.1 Performance specifications
For zero-based spans, reference conditions, silicone oil fill,
SST materials, 1 / -in. 14 NPT process connections, digital
2
trim values set to equal range points. Does not include any
error due to the effects of sealed gauge.
Conformance to specification (±3 Sigma)
Technology leadership, advanced manufacturing
techniques and statistical process control ensure
specification conformance to at least ±3 sigma.
Reference accuracy
Includes the effects of terminal based linearity, hysteresis,
and repeatability.
Range 2: ±0.25% of calibrated span from 1:1 to 7.5:1
rangedown
Range 4: ±0.25% of calibrated span from 1:1 to 40:1
rangedown
Range 5: ±0.25% of calibrated span from 1:1 to 30:1
rangedown
Range 6: ±0.25% of calibrated span from 1:1 to 30:1
rangedown
Long term stability
0.5% of span for three years under normal operating
conditions
A.2.2 Functional specifications
Table A-2. Range and sensor limits
Units
min.
psi 20
MPa 0.14
bar 1.38
2
kg/cm 1.41
Dynamic performance
500 Milliseconds (response time + dead time)
Ambient temperature effect per 100 °F (56 °C)
±0.03% URL + 1.0% span from 1:1 to maximum turndown
Service
Liquid, gas, and vapor applications
54
www.aotewell.com
Range 2 Range 4 Span
max. min.
150 125
1.03 125
10.34 125
10.55 125
sales@aotewell.com
Specification and Reference Data
Vibration effect
Less than ±0.1% of URL when tested per the requirements of
IEC 60770.84 pipeline (general and extreme vibration level)
(10-60 Hz 0.21mm peak to peak displacement/60-2000 Hz
3g).
Electromagnetic Compatibility (EMC)
Meet all relevant requirements of EN 61326.
Transient Protection (Option T1)
Meets IEEE C62.41, Category B
6 kV crest (0.5 μs – 100 kHz)
3 kA crest (8 20 microseconds)
6 kV crest (1.2 50 microseconds)
General Specifications:
Response Time: < 1 nanosecond
Peak Surge Current: 5000 amps to housing
Peak Transient Voltage: 100 V dc
Loop Impedance: < 25 ohms
Applicable Standards: IEC61000-4-4, IEC61000-4-5
Note
Calibrations at 68 °F (20 °C) per ASME Z210.1 (ANSI).
Range 5
max. min. max.
5,000 330 10,000
34.47 2.28 68.95
344.74 22.75 689.48
351.535 23.20 703.07
Industry Automation
September 2016
Range 6
min. max.
660 20,000
4.55 137.90
45.51 1378,95
46.40 1406,14
Specification and Reference Data
+86-755-8660-6182