Overview; Safety Messages - Emerson Rosemount 4600 Reference Manual

Reference Manual
00809-0100-4022, Rev GA
Section 2
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Commissioning on the bench with HART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Field Communicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Review configuration data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Check output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
Basic setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Detailed setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12
Diagnostics and service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Advanced functions for HART protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Multidrop communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
2.1

Overview

This section contains information on commissioning and tasks that should be performed on the
bench prior to installation. This section contains the Rosemount
Transmitter HART
Field Communicator and AMS
functions. For convenience, Field Communicator Fast Key sequences are labeled "Fast Keys" for
each software function below the appropriate headings.
2.2

Safety messages

Procedures and instructions in this section may require special precautions to ensure the safety
of the personnel performing the operations. Information that raises potential safety issues is
indicated by a warning symbol ( ). Refer to the following safety messages before performing
an operation preceded by this symbol.
Explosions can result in death or serious injury.


Electrical shock can result in death or serious injury.

Configuration
www.aotewell.com
Configuration
®
configuration information.
™
Device Manager instructions are given to perform configuration
Transmitters located in hazardous areas should be installed in accordance with local
codes and requirements for that area.
Verify that the operating atmosphere of the transmitter is consistent with the
appropriate hazardous locations certifications.
Avoid contact with the exposed leads and terminals. High voltage that may be present
on leads can cause electrical shock.
sales@aotewell.com
Industry Automation
Configuration
September 2016
™
4600 Oil & Gas Pressure
+86-755-8660-6182
3