Emerson Rosemount 4600 Reference Manual page 43

Reference Manual
00809-0100-4022, Rev GA
Not all calibration procedures should be performed for each Rosemount 4600. Some
procedures are appropriate for bench calibration, but should not be performed during field
calibration.
Rosemount 4600 transmitter for bench or field calibration.
Figure 4-1. Transmitter Data Flow with Calibration Options
A
A. Sensor
B. Input pressure
C. Input device
D. Field Communicator
E. Microprocessor digital PV
Note
Value on PV line should equal the input pressure. Value on AO line should equal the output
device reading.
Operation and Maintenance
www.aotewell.com
Table 4-1 identifies the recommended calibration procedures for each type of
TRANSMITTER RANGED 0 TO 1000 PSI
B
C
sales@aotewell.com
Operation and Maintenance
F
E
D
H
I
4600: PT-4763
Online
1 á Device Setup
2 PV
3 AO
4 LRV
5 URV
F. Transmitter electronics module
G. Analog output
H.20 mA
I. Output device
Industry Automation
September 2016
G
1000 PSI
20.00 mA
0.00 PSI
1000 PSI
+86-755-8660-6182
37