Emerson Rosemount 4600 Reference Manual page 29

Reference Manual
00809-0100-4022, Rev GA
2.11.1 Changing a transmitter address
Fast Keys
To activate multidrop communication, the transmitter poll address must be assigned a
number from one to 15, and each transmitter in a multidropped loop must have a unique
poll address.
Field Communicator
1.
AMS Device Manger
Right click on the device and select Configuration Properties from the menu
1.
2.
3.
2.11.2 Communicating with a multidropped transmitter
Fast Keys
Field Communicator
To communicate with a multidropped transmitter, configure the Field Communicator to
poll for a non-zero address.
1.
2.
AMS Device Manger
1.
2.11.3 Polling a multidropped transmitter
Fast Keys
Polling a multidropped loop determines the model, address, and number of transmitters on
the given loop.
Field Communicator
1.
AMS Device Manger
1.
Configuration
www.aotewell.com
1, 4, 3, 3, 1
From the HOME screen, enter the Fast Key sequence shown.
In the HART tab, in the ID box, enter the poll address located in the Poll addr box.
Select Apply.
An Apply Parameter Modification screen appears. Enter the desired information and
select OK.
After carefully reading the warning provided, select OK.
Left arrow, 3, 1, 1
From the HOME screen, enter the Fast Key sequence shown.
On the polling menu, scroll down and select Polling Addresses and select the
appropriate polling range. In this mode, the Field Communicator automatically
polls for devices at addresses within the specified range upon start up.
Select on the HART modem icon and select Scan All Devices.
Left arrow, 3, 1
From the HOME screen, enter the Fast Key sequence shown.
Select on the HART modem icon and select Scan All Devices.
sales@aotewell.com
Industry Automation
Configuration
September 2016
.
23
+86-755-8660-6182