Title Page
September 2016
Explosions can result in death or serious injury.
Electrical shock can result in death or serious injury.
Process leaks could result in death or serious injury.
ii
www.aotewell.com
Transmitters located in hazardous areas should be installed in accordance with
local codes and requirements for that area.
Use appropriately rated Ex adapters, blanking elements, and glands during
installation.
Keep process insulation at least 1-in. [25 mm] from transmitter connection.
Avoid contact with the exposed leads and terminals. High voltage that may be
present on leads can cause electrical shock.
Properly tighten process connections before applying pressure.
sales@aotewell.com
Industry Automation
Reference Manual
00809-0100-4022, Rev GA
Title Page
+86-755-8660-6182