Set Up Of New Semg Data Card; General Information - Vectra Fitness Genisys 2761 User Manual

OPErATiON
Vectra Genisys® Therapy System

SET uP OF NEw sEMg dATA CArd

General Information

The Vectra Genisys Therapy System incorporates a sEMG Data Card that allows the recording of sEMG data from sEMG therapy sessions .
After recording the sEMG data, it can be imported, saved to, and viewed through a Windows® PC equipped with the optional Patient Data
Management System . The Patient Data Management System software and Card Reader are designed to allow importing and easy access to
the sEMG data, printing of reports, adding session notes, and adding other sEMG specific information to the sEMG data through a Windows®
PC .
The Therapy System sEMG Data Card allows recording only of the sEMG Data . No sEMG Data may be recorded from the PC and saved to the
sEMG Data Card for use in the Therapy System . However, the sEMG session parameters may be saved to a Patient Data Card (refer to pages 80
through 89) and recalled in the Therapy System .
Each time an existing sEMG Data Card is used for another sEMG therapy session, the existing sEMG data is overwritten with the new session
data .
It is recommended that each patient be assigned a sEMG Data Card . sEMG Data cannot be saved or recorded to the Patient Data Card .
NOTE: This section applies only to models capable of supporting the functions of the sEMG module .
90