Remove Screws Securing Module; Disconnect Ribbon Cable At Module; Store And Secure Ribbon Cable - Vectra Fitness Genisys 2761 User Manual
Two/four channel electrotherapy / combination system / with cart, no semg, therapy system cart assembled / unassembled, nimh battery module, dual channel semg module, user remote controls, channel 3/4 electrotherapy module
Table of Contents
Advertisement
iNSTALLATiON/rEMOvAL
rEMOvAL- ChANNEL 3/4 ELECTrOThErAPY, NiMh BATTErY ANd LASEr MOduLE (CONTiNuEd)
Remove Screws Securing Module
With a #1 Phillips Screwdriver, remove the
four 4 mm x 20 mm screws securing the
Module to the Therapy System .
Disconnect Ribbon Cable at Module
Separate the Module from the Therapy
System and disconnect the Ribbon Cable
from the Module Connector Pins .
Do not disconnect Ribbon Cable from
the Therapy System .
124
Store and Secure Ribbon Cable
Roll the Ribbon Cable up and store in
the cavity of the Therapy System . Secure
Ribbon Cable with a nonpermanent
adhesive tape .
DIScOnnEcT
rIbbOn frOM
MODulE Only
Vectra Genisys® Therapy System
- Quick Links:
- Table of Contents
- Product Description
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
