PATiENT PrEPArATiON
ELECTrOThErAPY PATiENT PrEPArATiON (CONTiNuEd)
DURA-STICK™ Electrode Instructions
Connecting Lead Wires
Insert the lead with the Red (+) electrode
connector into one DURA-STICK Electrode .
Insert the lead with the Black (-) electrode
connector into the other electrode .
Make certain the lead wires are
seated completely into the electrodes .
NOTE: Use of conductive medium
or sponges is not required or
recommended . DURA-STICK
Electrodes are manufactured to
ensure the optimum conductivity
during therapy when properly
applied .
lEaD wIrE SEaTED
rED (+)
lEaD wIrE
black (-)
lEaD wIrE
34
Vectra Genisys® Therapy System
Securing Electrodes
Remove the DURA-STICK Electrodes from
the protective backing and apply to the
treatment area as prescribed . Ensure the
entire electrode surface is in contact with
patient skin by pressing into place .