OPErATiON
CLiNiCAL rESOurCES LiBrArY- CrEATiNg uSEr PrOTOCOLS
General Information
This library is a series of protocols created by the user and stored in the system memory . The following information gives general instructions as
to setting up, saving, and accessing User Protocols . Should the Default Protocols be restored, through the User Utilities, all User Protocols will be
permanently removed from the system .
The Therapy System memory will accommodate up to 200 user defined protocols . This is inclusive of all User Protocols, User Sequences, and
System Default Protocols . It does not include the Clinical Protocols™ .
Select Modality
Press the button beside the desired
modality on the Home screen or select
a Clinical Protocol using the Clinical
Resources Library button .
MODalITy buTTOnS
clInIcal rESOurcES
lIbrary buTTOn
Edit Modality Parameters
Press the modality Edit button (usually
in the lower right corner of the modality
Treatment Review screen) and edit as
prescribed .
Refer to respective sections of this manual
for the specific modality prescribed .
98
Select Clinical Resources Library
Press the Clinical Resources Library button
to begin the save process of the new User
Protocol .
EDIT
buTTOn
Vectra Genisys® Therapy System