Set Sequence Intensity; Intensity Knob Rotation - Vectra Fitness Genisys 2761 User Manual
Two/four channel electrotherapy / combination system / with cart, no semg, therapy system cart assembled / unassembled, nimh battery module, dual channel semg module, user remote controls, channel 3/4 electrotherapy module
Table of Contents
Advertisement
OPErATiON
CLiNiCAL rESOurCES LiBrArY- uSiNg SEquENCES (CONTiNuEd)
Give Patient Interrupt Switch to patient
and explain that pressing the Red button
once pauses the therapy session .
PrESSInG buTTOn OncE PauSES SESSIOn
If Patient Interrupt Switch is depressed, the
treatment will be paused and a message
will appear on the System screen .
Press any button to clear the message .
NOTE: If the Patient Interrupt Switch
is depressed a second time,
the message will clear from the
screen and the treatment will
remain paused .
Set Sequence Intensity
The first waveform/current in the Sequence
should be highlighted . Set intensity by
rotating the Intensity Control Knob to the
prescribed level .
InTEnSITy DISPlayED
Intensity Knob Rotation
Clockwise- Increases Intensity
Counterclockwise- Decreases Intensity
111
Vectra Genisys® Therapy System
Press the Down Arrow button until the
second waveform/current in the sequence is
Highlighted .
Set intensity by rotating the Intensity Control
Knob to the prescribed level .
Repeat for the third waveform/current in the
Sequence .
DOwn
arrOw
buTTOn
- Quick Links:
- Table of Contents
- Product Description
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
