OPErATiON
SET uP OF NEw sEMg dATA CArd (CONTiNuEd)
Insert New sEMG Data Card
Insert a new sEMG Data Card into the
system access port as shown below . The
Therapy System will automatically format
the new sEMG Data Card and a verification
message will appear .
Press any button to continue .
InSErT nEw
EMG DaTa carD
s
Prepare System and Patient
Prepare Therapy System and patient . Refer
pages 37 through
40 .
to
Set Up sEMG Therapy Session
Set up the patient's prescribed sEMG
therapy session . Refer to
through 60
modality set up .
Press the Setup sEMG Card button .
PrESS any buTTOn
TO cOnTInuE
pages 53
of this manual for sEMG
SETuP
EMG carD
s
buTTOn
91
Vectra Genisys® Therapy System
Enter Patient ID
Select the row of alpha or numeric
characters by pushing the button beside
the corresponding row . Select the desired
character in the row by pressing the row
button until the desired letter is framed .
SElEcT rOw anD characTErS