iNSTALLATiON/rEMOvAL
iNSTALLiNg
EMg MOduLE
s
This section applies only to models capable
of supporting the functions of the sEMG
module .
Position sEMG Module
Position the sEMG Module so that the two
mounting tabs are inserted into the System
or Channel 3/4 Electrotherapy Module
mounting slots .
MOunTInG
TabS
MOunTInG
SlOTS
Secure sEMG Module
Push the upper portion of the sEMG
Module until it snaps and is locked into
position .
127
Vectra Genisys® Therapy System
Install and Reinstall Additional Module
If desired, install a Channel 3/4, Battery
or Laser Module to the System . Refer to
pages 118 through 122
for installation
instructions prior to the following
procedures .
Install Rear Access Panel
Insert the Power Cord into the System
Mains connector . Install the Rear Access
Panel .
cOnnEcT
POwEr cOrD
NOTE: If installing the System to a
Therapy System Cart, refer to
pages 131 through 133
proper instructions .
rEar accESS
PanEl
for