OPErATiON
EMg + STiM ThErAPY SET uP (CONTiNuEd)
s
Set Alarm
Set the alarm trigger in relation to the
target by pressing the Alarm button until
the desired selection is displayed in the
Alarm icon .
The available selections are:
Above- Alarm sounds when a muscle
contraction surpasses the target .
Target- Alarm sounds when a muscle
contraction reaches the target .
Below- Alarm sounds when a muscle
contraction is below the target .
alarM
buTTOn
NOTE: If Volume is Off, no alarm will be
heard .
Set Audio Type
Audio sets the type of sound heard when
the muscle contraction reaches the Alarm
setting .
Press the Audio button until the desired
audio type is displayed in the Audio icon .
The available selections are:
Constant- Continuous sound . ________
Pulsed- Fast, short beeps . . . . . . . . . . . . . . .
Dynamic- Slow, long beeps . _ _ _ _ _ _
auDIO
buTTOn
NOTE: If volume is Off, no Audio type will
be heard .
74
Vectra Genisys® Therapy System
Select Stim Waveform
Press the Stim button .
STIM
buTTOn
uP arrOw
buTTOn
Press the Up and Down Arrow buttons until
the prescribed waveform is highlighted .
Press the Accept and Return Arrow button .
accEPT
anD
rETurn
arrOw
buTTOn
DOwn arrOw
buTTOn