OPErATiON
uLTrASOuNd (CONTiNuEd)
Start Treatment
Press the Start button to begin therapy
session .
Move the Applicator in a circular motion
over the treatment area .
STarT
buTTOn
NOTE: If US Coupling is On and
the Sound Head loses coupling
with the treatment area the session
will pause . When coupling is
reestablished the session will
automatically restart . See
page 29
for US Coupling settings .
Pause Treatment
Press the Pause button to pause therapy
session and maintain remaining time . To
resume treatment, press the Pause button
again .
or
If US Coupling is On, and the Sound
Head loses coupling with the treatment
area, the session will pause . When
coupling is reestablished, the session will
automatically restart . Refer to
US Coupling settings .
PauSE
buTTOn
51
Stop Treatment
To Stop treatment, press the Stop button
once . Treatment will stop and the
Treatment Review screen will display .
STOP buTTOn
page 29
for
Save to Patient Data Card
After session is complete, press the Save
to Patient Card button . Refer to
through 89
and use .
Vectra Genisys® Therapy System
pages 80
for Patient Data Card Setup