Maintenance; System; Cleaning The Therapy System; Cleaning The Lens - Vectra Fitness Genisys 2761 User Manual

MAiNTENANCE

CAriNg FOr ThE ThErAPY SYSTEM

Cleaning the Therapy System

With the system disconnected from the power source, clean the system
with a clean, lint free cloth moistened with water and mild antibacterial
soap . If a more sterile cleaning is needed, use a cloth moistened with an
antimicrobial cleaner .
Do not submerse the system in liquids . Should the unit accidentally
become submersed, contact the dealer or DJO, LLC Service Department
immediately . Do not attempt to use a system that has been wet inside
until inspected and tested by a Service Technician Certified by DJO, LLC .
Do not allow liquids to enter the ventilation holes in the optional modules .
This could permanently damage the modules .

Cleaning the Lens

Clean the Therapy System Screen Lens using NOVUS® Polish System .
Contact Novus at: novuspolish . c om
Cleaning Reusable Electrodes
Use distilled water on a damp cloth to wipe the surface regularly after
usage .

CALiBrATiON rEquirEMENTS

Calibrating Ultrasound Applicators

Annual factory calibration is required for all Ultrasound Applicators . Only
the Applicators should be sent to the factory or a Field Technician certified
by DJO, LLC for this procedure .
NOTE:
The unit was calibrated during the manufacturing process and
is ready to be placed into service upon delivery .
Council Directive 2002/96/EC concerning Waste Electrical and
Electronic (WEEE) . Indicates a requirement not to dispose of WEEE
as municipal waste . Contact your local distributor for information
regarding disposal of the unit and accessories .

FACTOrY SErviCE

When the Vectra Genisys Therapy System or any of the accessory modules
require factory service, contact the selling dealer or DJO, LLC Service
Department .
All Therapy System and accessory modules returned to the factory for service
must include the following:
WARRANTY REPAIR/OUT OF WARRANTY REPAIR
1 . Written statement containing the following information:
• RA Number- Obtain from Factory
• Therapy System or Module Model Number
• Therapy System or Module Serial Number
• Contact Person with Phone and Fax Numbers
• Billing Address (for Out of Warranty Repair)
• Shipping Address (Where to Ship Unit after Repair)
• Detailed Description of Problem or Symptoms
2 . Copy of original invoice issued at purchase of the Therapy System
or Module .
3 . Ship the unit to address specified by an authorized service
technician .
Service to these units should be performed only by Service Technicians
certified by DJO, LLC .
Ultrasound Applicators require annual calibration, from the date placed in
service, by the Factory or a Service Technician certified by DJO, LLC .
Through the purchase of a Service Manual, DJO, LLC has made available
circuit diagrams, component part lists, descriptors, or other information
which will assist authorized technical personnel to repair those parts of
the equipment which are designated by DJO, LLC as repairable .
147
Vectra Genisys® Therapy System
NOVUS is the Registered Trademark of NOVUS Inc .