Installation/Removal; Installation- Channel 3/4 Electrotherapy, Nimh Battery, And Laser Module; Possible System Configurations - Vectra Fitness Genisys 2761 User Manual

iNSTALLATiON/rEMOvAL

iNSTALLATiON- ChANNEL 3/4 ELECTrOThErAPY, NiMh BATTErY, ANd LASEr MOduLE

Possible System Configurations

The Vectra Genisys Electrotherapy and Combination Systems allow installation of optional modality modules, by the user . Specifically
designed for use with the Vectra Genisys Therapy Systems, these modules configure the Therapy System to meet virtually every therapeutic
need that a clinician may have . The following is a list of possible configurations of the Vectra Genisys Therapy System .
• Four Channel Electrotherapy or Combination System: Install the Channel 3/4 Electrotherapy Module to the Two (2) Channel Electrotherapy
or Combination System .
• Two Channel Electrotherapy or Combination System with Laser: Install the Laser Module to the Two (2) Channel Electrotherapy or
Combination System . Vectra Genisys Laser Applicators are sold separately .
• Two or Four Channel Electrotherapy or Combination System with sEMG and sEMG + Electrical Stimulation: Install the sEMG Module(s)
onto the System or the Channel 3/4 Electrotherapy Module, if equipped . This allows the System to have the potential of sEMG and
sEMG + Electrical Stimulation available on two channels (1 and 2 or 3 and 4) . The Vectra Genisys Therapy System is equipped with a factory
installed sEMG Module .
NOTE: The sEMG Module cannot be installed onto the Battery or Laser Module . It can only be installed onto the Two Channel System or
the Channel 3/4 Electrotherapy Module .
• Battery Powered Two Channel Electrotherapy or Combination System with sEMG and sEMG + Electrical Stimulation: Install the NiMH
Battery Module . The sEMG Module is factory installed on Vectra Genisys Therapy Systems .
NOTE: The Battery Module cannot be installed on a Four Channel System or a system with the Laser Module installed . The Channel 3/4
Electrotherapy or Laser Module must first be removed .
The Channel 3/4 Electrotherapy, NiMH Battery and sEMG Optional Modules are shipped with all necessary lead wires and accessories in order
to complete the installation and allow immediate use by a physician or licensed practitioner . The Laser Module requires separate purchase
of a Vectra Genisys Laser Applicator before the Laser Module will function .
No special tools or equipment are required for optional Module installation . The System is programmed to automatically recognize the new
Module(s), therefore, no software installation is required .
This section explains user installation procedures for the following modules: Channel 3/4 Electrotherapy Module, NiMH Battery Module, and
sEMG Module .
115
Vectra Genisys® Therapy System