Edit Stim; Select Target Option; Setting Max Target - Vectra Fitness Genisys 2761 User Manual

OPErATiON
EMg + STiM ThErAPY SET uP (CONTiNuEd)
s

Edit Stim

Press the Edit Stim button .
EDIT STIM buTTOn
Refer to page 45
for Stim Editing
procedures .
After editing is complete, press the Back
button .
NOTE: Stim treatment time is fixed and
cannot be changed .

Select Target Option

Three options are available for setting the
sEMG modality target:
Max- Maximum of muscle contractions in
10 seconds .
Avg- Average of maximums achieved in
15 seconds of muscle contractions .
Manual- Set Target manually .
Press the Target button until the prescribed
target option is displayed in the Target icon .
back
buTTOn

Setting Max Target

Make certain Target Max is displayed in the
Target icon .
Press the Capture Target button . Have the
patient begin contracting the muscle and
press the Begin Capture button . Patient
should contract the muscle as hard as
possible during the preset 10 second
contraction period .
TarGET
buTTOn
NOTE: The capture may be stopped by
75
Vectra Genisys® Therapy System
caPTurE TarGET
buTTOn
bEGIn caPTurE
buTTOn
pressing the End Capture button .
The System will then select the
maximum contraction level
achieved during the preset
10 second contraction period .