OPErATiON
PATiENT dATA CArd- SET uP OF NEw CArd (CONTiNuEd)
Deleting Pain Locations
Press the Delete button on the Pain Map
window .
DElETE
buTTOn
arrOw buTTOnS
accEPT anD rETurn
arrOw buTTOn
Use the Up and Down Arrow buttons to
highlight the Pain Location to be deleted .
Press the Delete button .
Press the Accept and Return Arrow button .
Repeat until all editing is complete, then
press the Back button .
Pain Scales
The Vectra Genisys Therapy System incorporates two internationally recognized Pain
Scales: one, VAS (Visual Analog Scale) has no indicator marks and, two, Numeric Scale
(indicated 1 through 10) . Use either of these for describing the amount of pain the patient
is experiencing . When either pain scale is set, the other will automatically set to the
corresponding level .
uP anD DOwn
Select Pain Scale
Select the desired Pain Scale by pressing the
corresponding button .
DElETE
buTTOn
Adjust Pain Scale
Press the Left and Right Arrow buttons to
adjust the Pain Scale to the level the patient
is experiencing .
nuMErIc PaIn
ScalE buTTOn
buTTOn
vISual PaIn
ScalE buTTOn
After the desired level is achieved, press the
Accept and Return Arrow button .
NOTE: Numeric Pain Scale illustrated .
85
Vectra Genisys® Therapy System
lEfT
arrOw
accEPT anD rETurn
arrOw buTTOn
rIGhT
arrOw
buTTOn