Clinical Resources Library- Creating New Sequences; General Information; Access Sequencing; Select Sequence - Vectra Fitness Genisys 2761 User Manual

OPErATiON

CLiNiCAL rESOurCES LiBrArY- CrEATiNg NEw SEquENCES

General Information

This Library is a series of Electrotherapy Waveform/Current Sequences created by the user for special electrotherapy treatment purposes and
stored in the system memory for recall and use . The following information gives general instructions for setting up, saving and accessing of
sequences . Should the Default Protocols be restored through the User Utilities, all user saved Sequences will be permanently removed from the
system .
The Therapy System memory will accommodate up to 200 user defined protocols . This is inclusive of all User Protocols, Sequences, and System
Default Protocols . It does not include the Clinical Protocols™ .

Access Sequencing

Press the Clinical Resources Library button .
Press the Sequencing button .
SEQuEncInG
buTTOn

Select Sequence

Press the Up and Down Arrow buttons until
the desired sequence is highlighted .
Press the Accept and Return Arrow button .
uP arrOw
buTTOn
accEPT anD
rETurn arrOw
buTTOn
105

Select First Waveform or Current

Press the New button . Press the Up and
Down Arrow buttons to highlight the
desired waveform/current .
DOwn arrOw
buTTOn
Press the Accept and Return Arrow button .
Vectra Genisys® Therapy System
nEw
buTTOn
uP arrOw
buTTOn
DOwn
arrOw
accEPT anD rETurn
buTTOn
arrOw buTTOn