OPErATiON
ExiSTiNg PATiENT dATA CArd uSE (CONTiNuEd)
Starting a New Treatment from Patient
Data Card
pages 32-35
Refer to
for Electrotherapy
patient preparation, select electrodes, and
page 36
secure electrodes . Refer to
Ultrasound patient preparation .
Press the Up and Down Arrow buttons to
highlight the desired treatment date and
time .
Press the View Treat . button .
Press Start New Treatment button .
vIEw TrEaT.
buTTOn
Optional Patient Interrupt Switch
Connect Patient Interrupt Switch to the
Therapy System . Give Patient Interrupt
Switch to patient and explain that pressing
the Red button once pauses the therapy
for
session .
cOnnEcT PaTIEnT
InTErruPT SwITch
STarT nEw
TrEaTMEnT
buTTOn
If Patient Interrupt Switch is depressed, the
treatment will be paused and a message
will appear on the System screen .
Press any button to clear the message .
NOTE: If the Patient Interrupt Switch
is depressed a second time,
the message will clear from
the screen and the treatment
will remain paused .
Set Intensity
Set intensity by rotating the Intensity Control
Knob to the prescribed level .
PaTIEnT
InTErruPT
SwITch
Intensity Knob Rotation
Clockwise- Increases Intensity
Counterclockwise- Decreases Intensity
88
Vectra Genisys® Therapy System
InTEnSITy
DISPlayED
rOTaTE
InTEnSITy
knOb