iNSTALLATiON/rEMOvAL
rEMOvAL- ChANNEL 3/4 ELECTrOThErAPY, NiMh BATTErY ANd LASEr MOduLE (CONTiNuEd)
Front Access Panel
With a #1 Phillips Screwdriver, remove the
screw retaining the existing Front Access
Panel .
Install Lanyard to the original Front Access
Panel using the same screw .
Install Lead Wires and Accessories
Re-install Lead Wires and Accessories to the
Therapy System Front Panel .
lanyarD
NOTE: When re-installing the Front Access
Panel to the Therapy System,
make certain the Lanyard does not
become kinked .
125
Vectra Genisys® Therapy System
Connect Mains Power
Connect the Mains Power Cord to the
Therapy System .
Install Rear Access Panel .
Connect the Mains Power Cord to an
approved power source .
MaInS
POwEr
cOrD
rEar
accESS
PanEl