Stopping Stim; Stopping Therapy Session - Vectra Fitness Genisys 2761 User Manual

OPErATiON
EMg + STiM ThErAPY SET uP (CONTiNuEd)
s
After Stim is complete, the screen will
change and the patient should relax the
contraction .
After the Relax period is complete the
screen will change to Go .
Repeat the process throughout the
prescribed treatment time or until the
patient is fatigued .

Stopping Stim

Stim may be stopped at any time during
the session by pressing the Stop sEMG +
Stim button .
STOP SEMG+STIM
Stim may be restarted at any time during
the session by pressing the Start sEMG +
Stim button .
NOTE: With Stim Off, the sEMG portion of
the session may continue .
79

Stopping Therapy Session

Press the Stop button . The Completed
Treatment Review screen will display .
buTTOn NOTE: Refer to pages 80 through 89 for
Patient Data Card set up and use .
The sEMG Data Card cannot be used to
save session parameters .
sEMG data, from an sEMG + Stim therapy
session, cannot be recorded to a sEMG Data
Card or Patient Data Card .
Vectra Genisys® Therapy System