OPErATiON
EMg ThErAPY SET uP (CONTiNuEd)
s
Start sEMG Therapy Session
Have patient perform contractions as
prescribed .
As the patient contracts the muscle, the
Vertical Scale for the channel being used
will begin to fill from bottom to top . When
the scale reaches the Target, the alarm will
sound .
TarGET
DISPlayED
vErTIcal
ScalE
Stopping sEMG Therapy Session
Press the Stop Button . The Completed
Treatment Review Screen will display .
channEl
ScalE
TarGET POInT
Each
cOnTracTIOn
MaxIMuM
NOTE: To record the sEMG Data to a sEMG
To save the session parameters to a Patient
Data Card, refer to
for set up and use of the Patient Data Card .
The sEMG Data Card cannot be used to
save session parameters .
60
Vectra Genisys® Therapy System
Data Card, refer to
the sEMG Data
Card Section
of this Manual for
Set Up and use of the sEMG Data
Card .
pages 80 through 89