Patient Preparation; Electrotherapy Patient Preparation; Electrode Placement - Vectra Fitness Genisys 2761 User Manual

PATiENT PrEPArATiON

ELECTrOThErAPY PATiENT PrEPArATiON

Electrode Placement

Examine the skin for any wounds and clean the skin .
•
Apply the electrodes to the treatment area .
•
Ensure the electrodes are applied securely to the skin .
•
Ensure good contact between each electrode and the skin .
•
Check the electrode contact regularly during the treatment .
•
Examine the skin again after the treatment .
•
Choose electrodes that fit the anatomy .
•
View the Electrode Placement recommendations in the
•
Treatment Review screen for the particular modality being used
for treatment as a reference point only prior to administering
treatment .
Refer to the respective electrode type instructions on
•
through 35 .
Follow electrode manufacturer instructions .
•
•
Keep electrodes separated during treatment . Electrodes in
contact with each other could result in improper stimulation
or skin burns .
•
Output current density is related to electrode size . Improper
application may result in patient injury . If any question arises
as to the proper electrode size, consult a licensed practitioner
prior to therapy session .
•
Powered muscle stimulators should be used only with
the leads and electrodes recommended for use by the
pages 33
manufacturer .
32
Vectra Genisys® Therapy System