OPErATiON
PATiENT dATA CArd- SET uP OF NEw CArd
General Information
The Vectra Genisys Therapy System incorporates a Patient Data Card reading and recording device that allows transfer of patient therapy
data from the system to the card for reviewing patient modality and pain profile information . Information may be transferred to a PC via the
optional Patient Data Management System . The PC software is designed to allow easy access to patient data and printing of reports as well as
adding session notes to the Patient Data Card .
The reading and recording device allows storage and recall of the following patient session data onto the Patient Data Card: Therapy Session
Parameters, Electrode Placement, Pain Map, Numeric Pain Scale or Visual Pain Scale, and Session Notes (stored on card via PC only) . Each
Patient Data Card can store multiple sessions and each session can be recalled on the Vectra Genisys Therapy System .
Insert New Patient Data Card
Insert a new Patient Data Card into the
system access port as shown below . The
Therapy System will automatically format
the new Patient Data Card and a verification
message will appear .
Press any button to continue .
InSErT nEw
PaTIEnT DaTa carD
Set Up Treatment
Set up the patient's prescribed treatment .
Refer to the appropriate area of this manual
for modality set up .
Administer treatment as prescribed . When
treatment is complete, the Treatment
Review screen will be visible .
PrESS any buTTOn
TO cOnTInuE
Set Up of New Patient Data Card
With new Patient Data Card inserted in
the system, press the Save to Patient Card
button .
SavE TO
PaTIEnT carD
buTTOn
80
Vectra Genisys® Therapy System