OPErATiON
EMg ThErAPY SET uP (CONTiNuEd)
s
Select Edit
Press the Edit button on the Treatment
Review screen to edit sEMG parameters as
prescribed .
Select Channel
Press the Channel Button until the
prescribed channel is displayed in the icon .
Therapy System
Available selections are 1, 2, or 1+2 .
EDIT
buTTOn
Channel 3/4 Electrotherapy Module
Available selections are 3, 4, or 3+4 .
channEl
buTTOn
NOTE: A maximum of two channels
may be used to administer sEMG
Therapy . Either channels 1+2 or 3+4 .
sEMG will not function as a four
channel modality .
Set Alarm
Set the alarm trigger in relation to the
target by pressing the Alarm button until
the desired selection is displayed in the
Alarm icon .
The available selections are:
Above- Alarm sounds when a muscle
Target- Alarm sounds when a muscle
Below- Alarm sounds when a muscle
NOTE: If Volume is Off, no alarm will be
56
Vectra Genisys® Therapy System
contraction surpasses the target .
contraction reaches the target .
contraction is below the target .
alarM
buTTOn
heard .